| Power consumption |
7,5 kW |
| Electrical requirements |
380 - 440 V (3P + N), 50 - 60 Hz, other voltage on request |
| Evaporator capacity |
31 litres of acetone per hour , different for other solvents depending on the heat of evaporation |
| Heating capacity |
6.6 kW, heat transfer <3W/cm2 |
| Bath heater control |
Electronic, with PT-1000, control accuracy + 0.5/- 1.5°C |
| Bath temperature range |
20°C - 150°C |
| Overheating protection |
Separate monitoring circuit, mechanically reset, additonal security switch off exceeding the set point by 15°C |
| Bath lift |
Electric motor |
| Vapor temperature measurement |
PT-1000 |
| Displays |
Vapor temperature, bath temperature, rotary speed, vacuum |
| Cooling surface area |
Two or three condensers of 0,6 m2 each, distillate cooler 0,08m2 |
| Cooling water consumption |
200- 400 l/h, 1,7 bar abs. maximum (without pulsation) |
| Weight |
300 kg without glass |
| Dimensions |
Height: Reflux 2.3 m ,Bullfrog Reflux 2.1 m, Descending 2.3 m Widht: 1.4 m Depth 0.85 m |
